Assured Automation, WM-NLCH-075 WM-NLCH Series Hot Water Meter

Description

We aim to show you accurate product information
. Here you will find what the manufacturers have provided us with. Water flows through the meter’s strainer (inlet and internal) and into the measuring chamber where it drives the impeller. A driving magnet transmits the movement of the impeller to a driven magnet located within the sealed register. The magnet is connected to a gear train which translates the impeller rotations into volume totalizers displayed on the meter’s register dial face.
The WM-NLCH Series water meter is top loaded and consists of three basic components: main case, measuring chamber, and head ring.
Features:
All parts in contact with water are constructed of corrosion-resistant materials
Body and coupling are made with low-lead brass alloy C87850 and meets potable water standards
Impeller is the only moving part in contact with water, giving the meter long life and consistantly reliable operation
Extra filter at the inlet of the meter body permits cleaning without having to open the meter
Dial plate design in US Gallons
Optional check valve to avoid reverse flow (lead-free)
Optional pulse output consisting of plastic housing with 2-wire (red and black) reed switch and cable
Max. Pressure: 150 psi
Max. Temperature: 194°F
Max. Reading: 050, 075, & 100: 9,999,999.99 150 & 200: 9,999,999.9
Accuracy: Normal Flow: ±1.5% / Low Flow: ±3%
Body & Couplings: EcoBrass
Internals: Engineered thermoplastic
Magnet: Alnico
Sensor: Reed switch
Maximum Current: 10mA
Maximum Voltage: 24VAC/vDC
Cable Length: 5’ standard, 2000’ max. run